How to reset Service Exceeded by 30 miles subsequently oil modify.

Mercedes-Benz Reset Musical instrument Cluster Service Reminder

There is two ways to reset the service reminder interval.

One is to use the steering bicycle buttons and access the musical instrument cluster menu. Instructions on how to practice that on several different models are shown below.
The second method is to utilise a OBD II scanner such as the iCarsoft MB 2 which allows you to reset the service intervals on most Mercedes-Benz models.

The two most common services are: A Service and B service

The Service A maintenance appointment will include the following tasks:

Change engine oil and filter,
Check the warning and indicator lamps and horn for functionality,
Check the windshield/headlamp wiper and washer systems for functionality and fluid levels,
Ensure that seat belts are operation correctly,
Inspect tires and check tire force per unit area (including spare),
Inspect brake pad thickness and disc status,
Check and correct all fluid levels, and
Reset your vehicle'due south FSS counter.

The Service B maintenance appointment will include the following tasks:

Change engine oil and filter,
Supervene upon windshield wiper inserts,
Inspect all tires for pressure level for and wear (including spare),
Rotate tires,
Lubricate and inspect throttle linkage,
Check parking restriction for functionality and inspect brake pad thickness and disc weather condition,
Bank check steering play for proper functionality,
Examine headlamps and exterior lamps, warning and indicator lamps, and horn for proper functionality,
Check windshield/headlamp wiper and washer systems for functionality and fluid levels,
Check seat belts and backrest lock (S-Class simply) for proper functionality,
Audit front axle brawl joints, rubber boots, and Poly-V-belt,
Bank check major components for leakage,
Bank check for abrasion marks, line routing, components,
Bank check and correct all fluid levels, and
Reset your vehicle'south FSS counter.

In all SLK, CLK, C-Class, and E-Class models, you'll too demand to supervene upon the grit filter.

How to Reset:Reset Service Indicator

Insert central into ignition, switch to position "ane".
Press buttons or repeatedly until the mileage is displayed within the multifunction display.
Press cluster illumination button (one) 3 times in curt succession. The bombardment voltage will be displayed and an audible bespeak will sound. Cluster illumination push button is on the left side of the cluster, non on the steering wheel.
Plow key in ignition to position "2"
Press the upwardly / downwardly buttons on the left side of the steering bike until the service menu appears.
Printing cluster illumination push button (1) once. The Oil Blazon menu is displayed.
Use the and buttons to select the oil used for the service.
Printing the up / buttons to confirm. The display will show: "Reset Oil Confirmation. Push R-Push for 3 seconds".
Printing and hold the cluster illumination button (ane) for iii seconds. The bulletin "Service confirmed" is displayed.

Plough key in steering lock to position ii.
Within 4 seconds press "0″ button twice. The present condition for days or distance displays, within x seconds turn the electroninc key in steering lock to position 0.

Printing and agree "0″ button while turning electronic key in steering lock to position two again.
The present status for days or distance displays over again.
Continue to hold "0″ button for approximately 10 seconds until a signal sounds and the display shows x 000 (15000KM) for approximately 10 seconds. Release 0 push button; the condition is reset.

Plow cardinal in steering lock to position 2.
To call up the trip odometer and principal odometer, press either of lower ii buttons on left mitt side of steering wheel (organization select looks similar file folder) until the display appears.
Press either of the top buttons on steering wheel (arrows) until the FSS indicator appears.
Printing R push on the musical instrument cluster for 2, four seconds.
The display reads DO YOU Desire TO RESET SERVICE INTERVAL? CONFIRM BY PRESSING R Printing R button on the instrument cluster again and hold until indicate sounds.

The message SERVICE INTERVAL HAS BEEN RESET appears on the multifunction brandish.

Source: https://www.mercedesmedic.com/how-to-reset-service-exceeded-by-xxx-miles-after-oil-change/